MultiNet V5.4 Messages & Logicals Table of Contents
-
Preface
-
Troubleshooting
-
MultiNet Messages
-
Absurdly long client literal user=user host=host
-
accept_decnet: $ASSIGN error (status=vms_error_value)
-
accept_decnet: $TRNLNM error (status=vms_error_value)
-
accept_tcp: $ASSIGN error (status=vms_error_value)
-
accept_tcp: Error! Server port number is below 6000 (port)
-
accept_tcp: getpeername error (errno=errno_value)
-
accept_tcp: getsockname error (errno=errno_value)
-
accept_tcp: setsockopt error (errno=errno_value)
-
access denied
-
Access_File I/O error, VMS Status = hex_vms_error
-
append to folder failed
-
Authenticated user=user host=host
-
Auto-filing of INBOX messages not completed
-
%BACKUP-E-OPENOUT, error opening disk as output-RMS-E-CRE, ACP file create failed
-
Bad address (EFAULT)
-
Bad address-addressError-%MAIL-E-ERRACTRNS, error activating transport username
-
Bad instance: name-value
-
Bad name: name-value
-
Bad realm: name-value
-
BRTOOFAR, destination 000001D2 is too far for branch operand and got on 18, RMTDRIVER\ECOSET, eco level 1 already set
-
Buffer didn't grow: Saved_eof = n, eof = n
-
Buffer extend failed!
-
Buffer extend failed in read!
-
Buffer_Flush I/O error, VMS Status = vms_hex_error
-
Buffer incorrectly in bitmap; vbn=n
-
Buffer n incorrectly in bitmap
-
Buffer_Read I/O error, VMS Status = vms_hex_error
-
BYE host Fatal mailbox error: error message
-
Byte order is value
-
Can't build data connection: %MULTINET-F-ECONNREFUSED, Connection refused.
-
Can't create subscription database
-
Can't create subscription temporary file
-
Can't open database: error error_number
-
Can't resize free storage
-
Can't write subscription temporary file
-
Cannot connect to MR
-
cannot rename new empty folder list
-
cannot save old empty folder list
-
cannot update folder database
-
cannot write sequential mail
-
CLI-E-IMGNAME, image file filename
-
%CLI-F-SYNTAX, error parsing 'SNMP_HOST'-CLI-E-ENTNF, specified entity not found in command tables
-
Client NFS: Unknown attribute nn
-
Client not authorized to access server
-
CNXMAN, lost connection to host node
-
Command not understood: Lexical error.
-
command stream end of file while reading char user=user host=host
-
command stream end of file while reading line user=user host= host
-
Compiler bugcheck. Submit an SPR with a problem description.
-
complete_decnet: Inbound $QIO IOSB (status=vms_error_value)
-
complete_decnet: Outbound socket error (errno=errno_value)
-
complete_tcp: Inbound End Of File
-
complete_tcp: Inbound $QIO IOSB (status=vms_error_value)
-
complete_tcp: $QIOW IOSB Outbound Error (status=vms_error_value?)
-
complete_tcp: $QIOW Outbound Error (status=vms_error_value)
-
Connection refused
-
%COPY-E-OPENOUT, error opening name as output-RMS-F-DEV, error in device name or inappropriate device type for operation
-
Could not open alternate database name
-
could not remove old empty folder list
-
Couldn't create database multinet:kerberos_principal, code=17
-
Couldn't bind to control socket:%MULTINET-F-EADDRNOTAVAIL, Can't assign requested address
-
Couldn't create file
-
Couldn't create temp database temp_file: code
-
Couldn't get master key.
-
Couldn't read master key.
-
Couldn't start filter server process, error explanation>
-
Couldn't store principal.instance; load aborted
-
Couldn't translate VMS error 828
-
Couldn't translate VMS error vms_hex_error
-
%CREATE-E-OPENOUT, error opening file as output-RMS-E-WLK, device currently write locked
-
%CREATE-E-READERR, error reading SYS$INPUT:.;-RMS-F-RER, file read error
-
Create_File I/O error, VMS Status = vms_hex_error
-
Create_File Write error, VMS Status = vms_hex_error
-
Cross-device link (EXDEV)
-
Database rename failed: error error_number
-
Date Invalid
-
%DCL-W-ACTIMAGE, error activating image MULTINET:COMPILE_HOST_TABLE-CLI-E-IMGNAME, image file filename
-
DCL-W-ACTIMAGE, error activating image MULTINET_TOPS_LIBRARY-CLI-E-IMAGEFNF, image file not found filename
-
%DCL-W-ACTIMAGE, error activating image MULTINET_VMS_SHAREABLE-CLI-E-IMGNAME, image file filename -SYSTEM-W-SYSVERDIF, system version mismatch; please relink
-
Deaccess I/O error, VMS Status = vms_hex_error
-
DECnet Connection is from server::user for server name
-
dectermport failed to find language, XOpenDisplay("") returned NULL%DECW-F-CANT_OPEN-DISPL, Can't open display
-
%DECW-I-ATTACHED, transport DECNET attached to its network%DECW-W-ATT_FAIL, failed to attach transport TCPIP
-
%DECW-I-ATTACHED, transport TCPIP attached to its network
-
%DECW-W-ATT_FAIL, failed to attach transport TCPIP
-
Delete_File I/O error, VMS Status = 0x800
-
%DIRECT-E-OPENIN, error opening directory *.*;* as input-RMS-E-PRV, insufficient privilege or file protection violation
-
Directory not empty (ENOTEMPTY)
-
Disk quota exceeded (EDQUOT)
-
%DISM-W-CANNOTDMT, NFSn: cannot be dismounted%SYSTEM-F-DEVNOTMOUNT, device is not mounted
-
Dispatcher: Bad Program #200006
-
Don't forget to do a 'KDB_UTIL load filename' to reload the database!
-
Duplicate DECnet mapping detected
-
Duplicate UID
-
Error 65
-
Error 84
-
Error attempting to change password.
-
ERROR: Couldn't create configuration fileMULTINET_ROOT:[MULTINET]NETWORK_DEVICES.CONFIGURATION
-
Error creating filter server mailbox, error explanation>
-
Error sending message to filter server, error explanation>
-
Error error-number> writing to filename>
-
Error getting packet filter information for device>
-
Error getting packet filter logging params for device>
-
Error opening filename>
-
Error opening filename> for output
-
Error parsing filter-definition>
-
Error: NULL token.
-
Error reading new password, password unchanged.
-
Error reading old password.
-
Error receiving startup banner from hostname
-
ERROR: sen can't $ASSIGN to FFI device:%SYSTEM-W-NOSUCHDEV, no such device available
-
Error: Service "nfs" not found
-
Error setting packet filter for device>
-
Error setting packet filter logging params for device>
-
Error updating Kerberos database
-
Error while deleting directory
-
Error while deleting mailfile
-
Error writing output file. Terminating.
-
ex0: transmit error=numberfacility>
-
Excessive authentication failures host=host
-
Excessive login failures user=username host=host
-
Expiration time for filter is before start time.
-
EXT_SRVTAB: bad instance name: instance-argument
-
EXT_SRVTAB: couldn't get local realm
-
Extend_File I/O error, VMS Status = vms_hex_error
-
Failed to parse configuration data, exiting
-
Fatal error user=user host=host mbx= mbx: error
-
File already accessed on channel.Drive is not mounted.
-
File exists (EEXIST)
-
Fill_In_File I/O error, VMS Status = vms_hex_error
-
FILTER_SERVER: Current AST count (n) is within 10% of ASTLM (n).
-
FILTER_SERVER: Current TQE count (n) is within 10% of TQELM (n).
-
Filter REPEAT keyword requires start and expiration times.
-
find_rule_queue: rule/destination rulename not found for component componentname
-
find_rule_queue: component componentname not found
-
Folder can not be deleted
-
Folder context corrupt (uidvalidity was n, now m). Please reopen folder.
-
Folder has inferior folders
-
Folder timer too low
-
Generic error
-
Get_Buffer Unix error n
-
Incorrect old password.
-
Invalid, choose 0-65535
-
Invalid data file size received
-
Invalid domain literal after @
-
Invalid group mailbox list: address
-
Invalid mailbox list: address
-
Invalid start or expiration time for filter
-
I/O error (EIO)
-
Image running for pid XXXXXXXX (process_name) is not installed or isnt installed /SHARED
-
Invoked as a type server
-
IP Connection is for server server_name from node[address]
-
Is a directory (EISDIR)
-
%JBC-E-SYMDEL, unexpected symbiont process termination
-
KDB_UTIL: Couldn't get master key.
-
KDB_UTIL: Unable to open filename
-
Kerberos Authentication failed: Can't decode authenticator (krb_rd_req)
-
KERBEROS DATABASE STASH: Couldn't read master key.
-
KERBEROS DATABASE STASH: Unable to open master key file
-
KERBEROS DATABASE STASH: Write I/O error on master key file
-
Kerberos db and cache init failed = error_number
-
Kerberos error: Bad Kerberos name format (kname_parse)
-
Kerberos error: error-message
-
Kerberos error on default value lookup, status found.
-
KERBEROS INIT: bad Kerberos instance format
-
KERBEROS INIT: bad Kerberos name format
-
KERBEROS INIT: bad Kerberos realm format
-
KERBEROS INIT: Generic error (get_inkt)
-
KERBEROS INIT: krb_get_lrealm failed
-
KERBEROS INIT: Password incorrect
-
KERBEROS INIT: Principal unknown (Kerberos)
-
KERBEROS INIT: Protocol error (get_inkt)
-
KERBEROS INIT: k_gethostname failed
-
KERBEROS LIST: can't find realm of ticket file: error_string
-
Kerberos rcmd failed: rcmd protocol failure
-
Kerberos realm realm-name error-message
-
key file truncated
-
krb_sendauth() failed: Principal unknown (Kerberos)
-
LIB$GET_EF failed for protocol
-
LICENSE-W-NOCOMB, multiple licenses could not be combined for MULTINET...
-
Line linenumber> filter already expired, not loaded: filter-definition>
-
Line too long before authentication host=host
-
%LINK-F-NOLINKSTB, linker-generated symbol table file is illegal
-
Link_File I/O error, VMS Status = vms_hex_error
-
logical_name logical name not defined
-
Login failure user=user host=host
-
Login user=user host=host
-
%MAIL-E-ERRACTRNS, error activating transport IN%LIB-E-ACTIMAGE, error activating image image name
-
%MAIL-E-ERRACTRNS, error activating transport username
-
%MAIL-E-ERRACTRNS, error activating transport SMTP%LIB-E-ACTIMAGE, error activating image image_name
-
%MAIL-E-OPENIN, error opening file as input-RMS-F-PLV, unsupported prolog version
-
%MAIL-E-USERSPEC, invalid user specification address
-
%MULTINET-F-EAFNOSUPPORT, Address family not supported by protocol family
-
Message from user MULTINET on node dispatcher: bad program # 200006
-
Mismatch - try again
-
Missing address after comma
-
Missing command before authentication host=host
-
Missing or invalid host name after @
-
mk_req failed: Principal unknown (Kerberos)
-
%MNCHK-I-LOGVRFY, personal login command procedure does not use 'F$VERIFY(0)
-
%MNCHK-W-DBVERMISM, database file file . . . does not match global section file version n
-
%MNCHK-W-DUPPHA, LAN adapters _dev_n: and _dev_n: both using physical address address
-
%MNCHK-W-NOROOTNS, no root nameservers are reachable
-
Modify_Attributes, don't have write access
-
Modify_Attributes I/O error, VMS Status = vms_hex_error
-
More than 40 found . . .
-
mount: access denied for client_name
-
%MOUNT-F-CTRLERR, fatal controller error
-
%MOUNT-F-UNSAFE, drive unsafe
-
%MOUNT-F-VOLALRMNT, another volume of same label already mounted
-
%MULTINET-F-ECONNCLOSED, Connection closed
-
MULTINET-F-ECONNREFUSED, Connection refused
-
MULTINET-F-ECONNRESET, connection reset by peer
-
MULTINET-F-EHOSTUNREACH
-
%MULTINET-F-EHOSTUNREACH, No route to host
-
%MULTINET-W-ENOBUFS, No buffer space available
-
%MULTINET-F-ERREADFLAGS, error reading interface flags for device-MULTINET-F-ENXIO, No such device or address
-
%MULTINET-F-ETIMEDOUT, Connection timed out
-
%MULTINET-F-MTUERR, error setting MTU for sen-MULTINET-F-EBUSY, Mount device busy
-
%MULTINET-F-SETPORT, unable to connect VMS device device: to MultiNet kernel for sln
-
MULTINET-W-STARTUPERR, error starting ethernet device name
-
MultiNet Printer Symbiont: Couldn't connect to host ip_addr port nnn
-
MultiNet Printer Symbiont: Error while waiting for ack of CF file:%SYSTEM-W-CANCEL, operation canceled, ABORTING PRINT JOB
-
MultiNet Printer Symbiont: Negative acknowledgement from IP_addrlpr queue not enabled (check printer type and printcap entry)
-
MultiNet Printer Symbiont: Negative acknowledgement waiting for ack of remote printer specification.
-
MultiNet Server: BootP: hardware address not found: address
-
MultiNet Server: Couldn't start RPCLOCKMGR, NFS/RPCLockmgr server not responding
-
MultiNet Server: $CREPRC failed, status = 39c
-
MultiNet Server: DHCP Control: DHCP server not starting; BOOTP service enabled.
-
MultiNet Server: Failure to create VMS print job = %XC
-
MultiNet Server: No Program to merge specified for server RPCLOCKMGR
-
Multinet Server: R_SERVICES: Bogus state dispatch, DCL still running
-
MultiNet Server: R_SERVICES: Couldn't create Mailbox (VMS error 2a14)
-
MultiNet Server: R_SERVICES: gethostbyaddr(ip_address) failed
-
MultiNet Server: R_SERVICES: I/O error %MULTINET-W-ECONNCLOSED, Connection closed
-
MultiNet Server: R_SERVICES: Socket read error%MULTINET-W-ECONNRESET, Connection reset by peer
-
MultiNet Server: Service FINGER pid nn failed: access violation, reason mask=!XB, virtual address=!XL, PC=!XL, PS
-
MultiNet Server: Service name pid nn failed: file specification syntax error
-
MultiNet Server: Unexpected Exception in MULTINET_SERVER process
-
MULTINET_SHOW: can't connect to mount server: RPC: Timed out
-
MULTINET_SHOW: No MultiNet Kernel
-
MULTINET_SHOW: Timed out. Resending... * * *MULTINET_SHOW: Timeout - SNMP Response not received from remote host
-
MultiNet SMTP Server: Failed to merge user written SMTP customizationimage: %LIB-E-KEYNOTFOU, key not found in tree
-
Must use comma to separate addresses: address
-
named: bad referral (domain !domain) from server
-
named: Lame server on domain (in domain?): [IP-Address].53 server
-
net read: %MULTINET-F-ECONNRESET, Connection reset by peer [Aborting data transfer]
-
Net use failed (code 5).
-
New_File out of virtual memory.
-
New-mail timer too low
-
NFS 005F: Authentication failure.(A)bort, (R)etry or (I)gnore?
-
NFS SERVER: Couldn't allocate miniprocess
-
NFS SERVER: Couldn't create RPC transport
-
NFS SERVER: Couldn't create RPC transport stack
-
NFS SERVER: Error getting socket structure
-
NFS Server: Server/Kernel version mismatch
-
NFS Server: SVC_RECV failed
-
NFS Server: UDP SVC_RECV failed
-
NFS Server: Unexpected Exception in Kernel-Mode
-
NFS Server: Warning: writeback cache non-empty
-
%NFSDISMNT-F-DISMOUNTERR, Dismount Error
-
%NFSMOUNT-F-BADRPCTRANSPORT, couldn't create RPC transport to node-MULTINET-F-EACCES, Permission denied
-
%NFSMOUNT-F-BADRPCTRANSPORT, couldn't create RPC transport to host>.%NFSMOUNT-F-RPCCREATEERROR, RPC Create Error: RPC: Program not registered.
-
%NFSMOUNT-F-BADRSIZE, Illegal NFS Read size specified
-
%NFSMOUNT-F-BADTIMEOUT, Illegal NFS Timeout value specified
-
%NFSMOUNT-F-BADWSIZE, Illegal NFS Write size specified
-
%NFSMOUNT-F-CANTLOAD, couldn't reload NFS UID translation table-SYSTEM-W-NONEXPR, nonexistent process.
-
%NFSMOUNT-F-MOUNTERR, Mount Error
-
%NFSMOUNT-F-NFSERR, NFS error-MULTINET-F-ESTALE, Stale file Handle
-
%NFSMOUNT-F-NOACCESS, access denied for mount_point
-
%NFSMOUNT-F-NOMOUNTRESPONSE, Mount server on "hostname" not responding
-
%NFSMOUNT-F-NONFSRESPONSE, NFS server on "TECHNO" not responding:RPC: Authentication error; why = Invalid client credential
-
%NFSMOUNT-F-NOREMOTEHOST, No remote host specified
-
%NFSMOUNT-I-MOUNTED, node::mount_point NFS mounted on mount_device
-
%NFSMOUNT-I-WAITDNS, waiting for the Domain Nameserver to start
-
%NFSMOUNT-W-NOPRIVMOUNTPORT, Not using privileged UDP port for MOUNT request
-
%NFSMOUNT-W-NOPRIVNFSPORT, Not using privileged UDP port for NFS request
-
nfs_read: Unexpected small buffer, fid (...)]
-
nfs_rename: channel 0; can't restart; context=n
-
No buffer space available (ENOBUFS)
-
No space left on device (ENOSPC)
-
No subscriptions
-
No such file or directory (ENOENT)
-
No tickets in file.
-
No tickets to destroy.
-
Non-authoritative answer:
-
Not a directory (ENOTDIR)
-
not an exported filesystem for name
-
Not found>, Create [y] ?
-
Not owner (EPERM)
-
Null command before authentication host=host
-
Null passwords are not allowed; try again.
-
%NTYCP-E-NOADDR, no address information found for host name host-name
-
%NTYCP-E-NOSUCHNODE, address for host name host_name not found
-
%NTYCP-E-NOSUCHPORT, port number for service name service-name not found
-
%NTYCP-E-NOTINET, host name host-name does not have an IP address
-
%NTYCP-E-DEVNAMERR, syntax error in device name device-name
-
%NTYCP-E-PORTSYNTX, syntax error in TCP port name port-name
-
%NTYCP-E-PORTRNG, port number n is not in range low-high
-
%NTYCP-E-CREATERR, error creating network terminal device
-
%NTYCP-E-DELETERR, error deleting network terminal device device-name
-
%NTYCP-E-NOTNTY, device is not a network terminal
-
%NTYCP-S-CREPORT, device _NTYx: created to host ip-address, port port-number
-
%NTYCP-S-DELPORT, device _NTYx: deleted
-
%NTYCP-F-INTERNAL_ERROR, internal logic error in NTYCP
-
%NTYCP-F-CMDINITERR, error initializing command I/O routines
-
%NTYCP-W-CMDERR, error processing command input
-
%NTYCP-W-OPENCMD, error opening file file-spec for command input
-
%NTYCP-W-LOGDEFERR, error defining logical name
-
%NTYCP-W-PORTREQD, a TCP port name or number must be specified with /SERVICE or /PORT%NTYCP-W-NODEREQD, a node name or address must be specified with the /NODE qualifier
-
Opening DECnet Connection To node
-
Opening value connection to Node name, Server X_server
-
open_decnet: $ASSIGN error (status=vms_error_value?)
-
open_decnet: $QIOW error (status=vms_error_value?)
-
open_decnet: $QIOW IOSB error (status=vms_error_value?)
-
open_tcp: connect error (errno=errno_value)
-
open_tcp: setsockopt error (errno=errno_value)
-
open_tcp: socket error (errno=errno_value?)
-
open_tcp: Unable to resolve IP address for X server node node_name
-
Operation not supported on socket (EOPNOTSUPP)
-
Out of free storage
-
Pad: padding_amount Buf: buffer_size
-
Password NOT changed.
-
Permission denied (EACCES)
-
Printer Server: ansi_q: Recvjob lost connectionError in creating job number file
-
Printer Server: Failed to merge user written LPD Server image:%LIB-E-KEYNOTFOU, key not found in tree
-
Printer Server: Failed to merge user written LPD Server image:%RMS-F-RFA, invalid record's file address (RFA)
-
Probable bogus newsgroup list
-
protocol Event Flag is flag_value
-
(protocol) Event Flag Mask is mask_value
-
%PSM-E-OPENIN, error opening filename as inputRMS-F-DEV, error in device name or inappropriate device type for operation
-
%PSM-E-OPENIN, error opening SYS$LIBRARY:SYSDEVCTL.TLB as input-RMS-E-FNF, file not found
-
%PSM-E-READERR, error reading !AS-RMS-W-RTB, !UL byte record too large for user's buffer
-
%PSM-E-READERR, error reading print_file -RMS-W-RTB, nnn byte record too large for users buffer.
-
%PSM-E-WRITEERR, error writing !AS-SYSTEM-F-NOTPRINTED, failed to queue spool file for print
-
%PSM-E-WRITEERR, error writing !AS-SYSTEM-W-NOMSG, Message number 000081B0
-
%QUEMAN-F-OPENOUT, error opening queue_name as output-RMS-E-FLK, file currently locked by another user
-
%RCP-F-ERROR, message
-
Read only file system (EROFS)
-
%RMS-E-DNF, directory not found
-
%RMS-W-RTB, nnn byte record too large for user's buffer
-
%RMT-F-ALLOCERR, Error allocating RCD0 device-SYSTEM-F-INSFSPTS, insufficient SPTEs available
-
%RMT-I-REMINFO, Remote error code 34516,"%SYSTEM-F-NOMSG, Message number number"
-
RPC timed out server not responding
-
RPCMount: Refused RPCMount request from client_name not authorized
-
RPCMount: Rejected mount request from client_nameCouldn't get file handle for mount_point
-
RPCMount: Rejected mount request from client_namenon-AUTH_UNIX credentials
-
RPCMount: Rejected mount request from impostor client_nameName client_name doesn't map to address ip_addressRPCMount: Rejected mount request from client_nameunable to get hostname for ip_address
-
RPCMount: Rejected mount request from ip_address mount_point is not an exported filesystem
-
RPCMount: Rejected mount request from ip_addressmount_point is not an exported filesystem for client_name
-
se0: Transmit error (VMS Device Driver reported %X3c204c)
-
%SET-E-DEVOFFLINE "Device not in configuration"
-
%SET-E-NOMSG, Message number 1077808A
-
setsockopt(SO_RCVBUF): %SYSTEM-F-IVCHAN, invalid I/O channel
-
%SET-W-NOTSET error modifying nodeCLI-E-IVDEVTYPE invalid device type - specify a mailbox device
-
Signal caught, sig = signal code = sigtype old pc = program-counter exiting
-
Startup message, Debug level is value
-
Stale File System (ESTALE)
-
start_decnet: $QIOW error (status=vms_error_value)
-
start_tcp: $QIOW error (status=vms_error_value)
-
syslog: MultiNet Server: pausing for old server to write dump file and exit
-
%SYSMAN-I-NODERR, error returned from node name -SYSTEM-F-INSFMEM, insufficient dynamic memory
-
%SYSTEM-E-NORIGHTSDB, rights data base file not found
-
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=address, PSL=nnnnnnnn
-
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC=address, PS=nnnnnnnn%TRACE-F-TRACEBACK, symbolic stack dump follows
-
%SYSTEM-F-ACCVIO, access violation, reason mask=04,virtual address=00003800,PC=000133ED,PSL=0BC00004
-
SYSTEM-F-BADVEC, invalid change mode or message vector
-
SYSTEM-F-FORCEDEXIT, forced exit of image or process by job controller
-
SYSTEM-F-IVDEVNAM, invalid device name-SHOW-W-OPENIN, error opening -name as input
-
%SYSTEM-F-NOLOGNAM, no logical name match
-
%SYSTEM-F-ILLIOFUNC ...
-
%SYSTEM-F-INTDIV, arithmetic trap, integer divide by zero at location
-
SYSTEM-F-VASFULL, virtual address space is full
-
tcp/ip remote startup error timeout occurred connection to node: nodename
-
Telnet: Out of space.
-
Text file busy (ETXTBSY)
-
There were more tuples found than there were space for
-
Tickets destroyed
-
Tickets NOT destroyed.
-
Too many open files (EMFILE)
-
%TPU-E-OPENOUT, error opening filename as output-RMS-E-PRV, insufficient privilege or file protection violation
-
Trying... [IP_address] %MULTINET-F-EACCES, Permission denied
-
%UCX-E-LPD_REQREJECT, Print request rejected by host%QMAN-I-INVSMBMSG, invalid data in message from symbiont on queue host
-
Unable to create scratch file to write message data
-
Unable to create TCP socket: error message Unable to init network channel
-
Unable to get local realm. Check MULTINET:KERBEROS.CONFIGURATION.
-
Unable to get peer name: error messageUnable to init network channel
-
Unchanged
-
Unexpected characters after address in group: address
-
Unexpected characters at end of address: address
-
Unexpected VMS error: SS$_EXQUOTA
-
Unknown character set
-
unparseable date field
-
Unterminated comment: string
-
Unterminated mailbox: address
-
User authorization failure
-
Warning: Message has unknown MIME version
-
Warning: Unexpected error 9 (ffff)Good Evening, xxxxxx.
-
X Toolkit Error: Can't Open display%DWT-F-DWTABORT, xtoolkit fatal error
-
%X11DEBUG-F-CONNECTFAIL, error connecting to address
-
X11DEBUG-F-NOSERVER, X11 Server n on address is not running
-
%X11DEBUG-F-REFUSED, X11 Server refused the connection-X11DEBUG-F-AUTHFAILED, authentication failure
-
%X11DEBUG-F-UNKNOWNHOST, unknown host XBOSTON-X11DEBUG-I-USERACTION, reissue the SET DISPLAY command
-
X11DEBUG-I-USERACTION, either the server is down-X11DEBUG-I-USERACTION, or the wrong server number was specified to SET DISPLAY
-
Xgateway: Configuration Error - value Logical Name Not Defined
-
Xgateway: Unable to resolve IP address for X server node hostname
-
Xgateway: IP socket call failed - errno=errno_value
-
Xgateway: IP setsockopt call failed - errno=errno_value
-
Xgateway: IP connection failed to node name server number- errno=errno_value
-
Xgateway: $ASSIGN to _NET: device error - VMS Status=vms_error_value
-
Xgateway: Cannot Open DECnet Channel to Node name Server number - VMS Status=vms_error_value*
-
Xgateway: Can't Open DECnet Channel to Node name Server number - VMS IOSB=vms_error_value*
-
MultiNet Logicals
-
Utility Return Codes
-
Error Codes
-
SSH Status Codes
-
Introduction
-
Configuring DECnet Application Services
-
NOT-CONFIG Commands